nTop Showroom

Next Generation nTop Modeling Software Enables Faster Design, Greater Precision

The nTop 5 software is said to represent a major advance in implicit modeling, and includes integrations from five new partners to advance the design-to-manufacturing workflow.

Implicit Modeling for Additive Manufacturing

Some software tools now use this modeling strategy as opposed to explicit methods of representing geometry. Here’s how it works, and why it matters for additive manufacturing.

EOS, nTop Create File Capability to Limit Design Data Bottlenecks

EOS and nTop have created a new nTop Implicit File that can result in up to 99% smaller file sizes, 500 times faster file generation and 60% faster load time, making it more readily available to additive manufacturing build preparation software for manufacturing.

Possibilities From Electroplating 3D Printed Plastic Parts

Adding layers of nickel or copper to 3D printed polymer can impart desired properties such as electrical conductivity, EMI shielding, abrasion resistance and improved strength — approaching and even exceeding 3D printed metal, according to RePliForm.

Additive Wins on Cost, Plus Process Monitoring and More from RAPID + TCT 2023: AM Radio #38

Additive manufacturing is finding success as a cost-effective manufacturing method. New options for process monitoring are now available. DED is getting more precise. 3D printed chairs! What we learned and observed at RAPID + TCT 2023.

Updated nTop Platform Advances AM Design, Simulations

The updated design and simulation solution builds upon nTop's core technologies and introduces new capabilities across four key themes — design, integration, scaling and adoption.

3D Printed Replacement Clamp for an F-16 Aircraft: The Cool Parts Show #54

3D printing is a valuable addition to sustainment programs, but only if printed parts can be qualified as fast and flexibly as they can be made. In this episode of The Cool Parts Show, we look at the clamp that won the Air Force’s Approval Sprint Challenge designed to address this need.

Artemis I Has Launched: 3D Printing Applications for This Space Mission and Beyond: AM Radio #25B

On this episode of AM Radio, we discuss how additive manufacturing is enabling a new era of space exploration.

3D Printed Cold Plate for an Electric Race Car: The Cool Parts Show #51

An unconventional lattice design and biomimicry are key to the performance of this fluid-cooled heat exchanger for a battery-powered race car.

To the Moon and Beyond with Additive Manufacturing

Aerojet Rocketdyne uses metal 3D printing technology from Velo3D to make a critical flight component lighter, smaller, and much less expensive than its predecessors.

Microturbine Relies on 3D Printed Housing to Preheat Fuel

The aluminum housing designed with nTopology and made on a Velo3D laser powder bed fusion system helps realize what its creators say will be the highest-power-density small turbine yet produced.

Topology Optimization Software Enhances Gripper Reliability

Design software with built-in topology optimization and reconstruction features enabled Preziosa Francesco SRL to use Desktop Metal’s Studio System to improve the performance of a robotic gripper.

nTopology 3.0 Speeds Advanced AM Engineering Design

New opt-in feature enables nTop users to experience an instant 10 to to 100 times performance boost when visualizing workflows that use complex field-driven geometry.

Stratasys, nTopology’s Fixture Software Simplifies AM Modeling, Design

FDM Assembly Fixture Generator automates design of jigs and fixtures, enabling engineers to quickly turn a part file into a ready-to-print fixture with a simple drag-and-drop function.

Metal 3D Printed Part Has Unplanned Feature, Not Part of the Design — AM: Why the Failure? #2

This component for the oil and gas industry features a shelf through the lattice structure that does not appear in the CAD model. How did it get there? The answer does not involve STL, but we talk about that anyway.

3D Printing Changes a Drone Engine: The Cool Parts Show #9

Cobra Aero made the engine cylinder of an unmanned aerial vehicle (UAV) both more powerful and easier to manufacture. Learn what additive manufacturing is doing for drones in this episode of The Cool Parts Show.

Topology Optimized 3D Printed Spine Implant: The Cool Parts Show #2

Medical contract manufacturer Tangible Solutions shares a titanium 3D printed spine implant with an unusual lattice structure in this episode of The Cool Parts Show.

10 Impressions of Rapid + TCT 2019

The largest additive manufacturing exposition in North America is now a mature industry trade show. Here is what the editors of Additive Manufacturing Media saw at this year’s Rapid + TCT.